Taga Harmony PC Series, Инструкция по эксплуатации

Страница: 10 / 12

10
Hooking Up the Conditioner and Operation
4. Grounding is recommended for this conditioner. Using a solid, insulated cable (not supplied with
this product) connect the Ground Screw with the ground source in a room.
5. Your conditioner is ready for operation.
6. Plug the Power Cable to the conditioner and into the electrical outlet.
7. Whenever the power line conditioner is connected to the electrical outlet which is properly
working the Voltage Meter will be displaying approximate current voltage in Volts.
Note! The results of Voltage Meter measurement accuracy are highly approximate and should
not be taken into account for the professional assessment of the power line quality.
8. Turn on the conditioner (the Power Switch should be in the upper ON position). It is not required
if you want to use audio-video equipment connected to the Unswitched Power Sockets.
9. Turn on your audio-video equipment and enjoy your system.
IMPORTANT SAFETY REMARKS!
• This unit requires a single-phase 3-conductor electrical outlet.
• We recommend to use Schuko plugs in all power cables.
• Make sure not to overload the power line conditioner and individual groups
of Power Sockets.
Power load for each group of Power Sockets: the total maximum power
consumption for all connected devices to a given group should not exceed
the maximum power load for this group.
The maximum load for each group is given in Amperes (A) in a bracket following
the group number printed on the conditioner: it is also available
in the specifications on www.TagaHarmony.com
Total maximum power load: the total maximum power consumption for all
connected devices to the conditioner should not exceed the maximum power
load for this conditioner.
The total maximum power load for this conditioner is given in Kilowatts (kW)
or Watts (W) on the rear panel of the conditioner : it is also available
in the specifications on www.TagaHarmony.com
• When you want to turn off the power line conditioner we recommend
to turn off your audio-video equipment firstly.
• This power line conditioner is not a uninterruptible power supply unit (UPS).
It will not operate when the input power source fails (no power or too low
voltage).