Taga Harmony HTR-1500CD, Инструкция по эксплуатации

Страница: 35 / 52

BEFORE BEGINNING
1. Download the Control Application for mobile devices - check “Control Application” for
more details.
2. Make sure that your local network device (router, access point etc.) is connected to
the Internet.
3. Hook-up the CD-Receiver to work with your local network device.
Check „ Connecting the Wireless Antenna” for more details.
Check „ Connecting to the Wired Network (LAN)” for more details.
Note! The CD-Receiver operates only in 2.4 GHz wireless networks.
4. Make sure to activate the following options in your audio source device setup
(mobile devices and computers):
Wi-fi GPS
Bluetooth
®
Mobile device
√ √
(required for the setup)
√
Computer
√
(not required for LAN)
√
Play from Network
DEVICE NAME
The CD-Receiver network device name is “HTR-1500CD ####”, where #### is 4 last
hex digits of its unique MAC address.
The CD-Receiver MAC address can be found in the Control Application : Settings →
Speaker Info.
NETWORK STATUS
STATUS SHOWN ON THE DISPLAY
Not connected to the network NO NET
Connected to the WIRELESS (wi-fi) network WIFI
Connected to the WIRED (LAN) network LAN
5. Make sure that the audio source device and the CD-Receiver, and for mobile
devices the Control Application as well, are in the same network.
6. Turn on the CD-Receiver and rotate the INPUT knob on the front panel or press
the
NETWORK
button on the remote controller to select the Network input.
[NETWORK MODE] will be displayed.
If there is no network connection, [NO NET] will be displayed.
34