Taga Harmony HTR-1500CD, Инструкция по эксплуатации

Страница: 28 / 52

Operation
To Skip or Search and Play
• Press the l ◄◄ / ►► l buttons on the front panel or ► l / l ◄ buttons on the remote
controller once or more to skip previous/forward one or more tracks on the disc or
use the number buttons. To select track number 12, directly press 1, 2 buttons etc.
Press and hold the
l
◄◄ / ►►
l
buttons on the front panel or ►► / ◄◄ buttons on
the remote controller to search for the position that you intend to start playing.
Release to resume normal play.
Programme Play
You can programme up to 20 tracks to play in any desired order.
The player must be in the Stop mode only with a CD disc inserted.
1. Insert a disc and press the button when it starts playing.
2. Press the PROG button, [001 P--01] will be displayed.
3. Press the ALB+/- buttons to select a folder.
4. Press the
l
◄◄ / ►►
l
buttons on the front panel or 0-9, ►
l
/
l
◄ buttons on the
remote controller to select the desired track number.
• To select track number 12, directly press 1, 2 buttons etc.
5. Press the PROG button to confirm the track number to be stored.
6. Repeat steps 3-4 to select and store all desired tracks.
7. Press the ►
ll
button to start the programme play.
8. Press the button once to stop the programme play.
Press the button twice to clear the programme, [PRG CLR] will be displayed.
Repeat and shuffle play (CD disc)
• During playing - ONE/ALL Repeat Play and Shuffle Play can be set by pressing the
MODE button.
◦ First press: to repeat the same track, [RPT ONE] will be displayed.
◦ Second press: to repeat all tracks on a disc, [RPT ALL] will be displayed.
◦ Third press: to play all tracks randomly (shuffle mode), [SHUF ON] will be
displayed.
◦ Fourth press: to cancel the repeat or the shuffle mode, [RPT OFF] will be
displayed.
MP3/WMA Disc Playing
Note! Correct MP3/WMA music playback from CD depends on the type and format of
the disc and the condition of individual recordings.
If you are having trouble playing a certain disc, it is recommended to use the USB input
instead.
1. Rotate the INPUT knob on the front panel or press the button on the remote
controller to select the DISC input. [DISC] will be displayed.
2. Press the button to open the disc tray and place the MP3/WMA disc on it (with the
printed side up).
Note! If the disc tray is not closed manually within approximately 60 seconds, it will
close automatically.
3. Press the button to close the disc tray, the player will read the disc and play it
automatically.
Note! If in the Stop mode, please press the ► ll button to start playing the disc.
4. Press the ► ll button to temporarily stop the playing, press the button again, it will
continue to play.
27