8
Rear Panel:
14. Analog Stereo RCA Inputs CD / LINE
15. Digital Input OPTICAL
16. Preamplifier Stereo RCA Output
17. Speaker Right Channel Output (Speaker Connectors)
18. Speaker Left Channel Output (Speaker Connectors)
19. Power Cable Input and Fuse Box
20.
Bluetooth
®
Antenna and Antenna Socket
Front and Rear Panel
15
14
16
17
18
19
20
A blown fuse should be only exchanged for exactly the same type as
indicated on the rear amplifier panel.
The Power Cable should be disconnected!
Before connecting make sure that your amplifier is turned off.
Do not let bare speaker wires touch each other or any metal part
of this unit it can damage this amplifier and/or speakers.
This may void your warranty.
The Speaker Connectors can accommodate up to 10AWG speaker cables as well
as most of popular plugs (banana etc.). It is recommended to leave about 150 cm
(5 feet) of extra cable at the amplifier end to facilitate positioning and installation of the
amplifier. Do not use staples, nails or other metal objects to secure the cables.
You will get the best sound quality and least amount of hum by keeping the cables
away from other electrical wires and cables.
Pay attention to connecting the polarity of the amplifier correctly with the speakers
in each speaker group (speakers should be connected RED + with RED + amplifier
connector, BLACK – with BLACK – amplifier connector).
Hooking Up Speaker Cables
Please refer to your speaker instruction manual for more information.
