13
Bluetooth
®
Connection
BASS regulator (front panel):
You can adjust bass output of the amplifier. The default: the knob is in the center
position : the marker on the knob in the vertical position.
Turn the knob counterclockwise (-) to decrease the amount of low frequencies.
Turn the knob clockwise (+) to increase the amount of low frequencies (+).
The BASS regulator is active only in the DIRECT OFF mode.
DIMMER (remote controller):
After the amplifier is turned on, the vacuum tube window is backlit (factory setting).
Press the DIMMER button to switch off the backlight of the vacuum tube window.
Press the button again to switch on the backlight.
Operation
Bluetooth
®
Connection
•
After the amplifier is switched on - the built-in
Bluetooth
®
receiver is waiting to be
paired with a
Bluetooth
®
source.
•
Select the
Bluetooth
®
input – the blue
Bluetooth
®
Input LED indicator will be flashing.
•
Select
Bluetooth
®
on your audio source (smartphone, laptop etc.) and start scanning
for available
Bluetooth
®
devices.
•
After a short time “HTA-600B” will appear on the screen of your audio source.
•
Select “Pair” on your audio source to connect with the amplifier.
After connection is successful the
Bluetooth
®
Input Led Indicator will be illuminated
continuously and it will remain illuminated as long as the current connection is active.
•
HTA-600B will now be ready to play your music wirelessly within a range of
approximately 5 meters. Start playback on your audio source.
Note!
Please refer to your audio source user instruction for details on operating the
Bluetooth
®
. Operation and names of specific functions may vary on different devices.
Important Notes - Bluetooth
®
Connection
•
As long as the amplifier is not switched off for longer than 10 seconds – the current
Bluetooth
®
connection is active (even if you change the input). After that time the
connection is lost and you will have to repeat the pairing procedure.
•
When you move away from the working range of the amplifier
Bluetooth
®
receiver for
longer than 60 seconds, the current
Bluetooth
®
connection will be lost and you will
have to repeat the pairing procedure. Within 60 seconds the connection can
be automatically reconnected.
•
When you want to use another
Bluetooth
®
audio source than currently active,
you have to disconnect the active connection and start the
Bluetooth
®
connection
procedure.
•
Make sure the antenna is securely and firmly installed as well that it is not obscured-
otherwise the “HTA-600B”
Bluetooth
®
device may not be found or connection may be
unstable.
