27
running in and warming up
TAG McLaren Audio equipment is designed to give optimum
performance for many years.
Just like a high-quality car, the performance of your CD20R will
improve during the first few hours of operation. The electronic
components will then have reached and settled down to near-
perfect specification.
Every time you switch on your CD20R, the performance will improve
until the components reach their optimum operating temperature.
running in
warming up
OUTPUT 1
and
2
are used to connect your CD20R to an amplifier,
and can also be used for analogue tape recording. The low-
impedance (100
Ω
) output is buffered and will drive long cables
or several inputs in parallel if required.
OUTPUT 1
and
2
are
connected together in parallel.
Muting of the audio output is automatic.
The digital output is provided in order to allow connection of your
CD20R to equipment with a digital input, such as a DAT recorder,
thereby allowing recording in the digital domain without any loss
of quality.
The digital output is accessible via a phono socket on the back
panel of the CD20R marked
COAXIAL OUTPUT spdif 75 ohm
.
The output conforms to the SPDIF format and is intended to be
used with 75
Ω
cable.
audio output
output for
digital
recording
26
outputs
left
right
1
2
O U T P U T
C O A X I A L O U T P U T
spdif 75 ohm
GRA00046.1-[CA]CD20R 13/03/01 09:37 Page 27
