We know you are keen to get your CD20R working. This section
will have you listening to your favourite CD as quickly as possible.
If you fold out the front cover of this manual you will locate
diagrams which will help you find your way around your CD20R
(1)
.
Make sure that all the components of your audio system are
disconnected from the AC supply whenever you change any
connections.
Use a good-quality, screened phono-phono audio cable to connect
the phono sockets marked
OUTPUT
(2)
left
and
right
on the back of
your CD20R to the corresponding CD inputs of your amplifier
(3)
.
Make sure the amplifier’s volume is turned down and the CD
input is selected.
Check that the power button is
out
so that power is off when you
plug in
(4)
. Using the cable supplied, connect the socket on the
back of your CD20R to an AC supply outlet. For the best sound
quality, we recommend that you do not use multi-plug adaptors.
Press the power button in. The blue power LED will come on and
the display window will light up and show the word
DISC
(5)
.
before
you start
amplifier
connection
power
connection
switch on
Press the
open
/
close
button
(6)
. The CD drawer will slide open.
The first time you open the CD drawer you will find a transit mat
which protects the CD transport mechanism while the player is being
moved. Remove the transit mat from the drawer and keep it with the
packaging. Put the transit mat back in the CD drawer whenever you
move your CD20R
(7)
.
Put a CD in the drawer with its label facing up. Press the
play
button to close the drawer and start the CD playing. Turn up the
volume on your amplifier, sit back and enjoy the music.
Feel free to experiment with the controls. You cannot damage the
CD or the CD20R if you press the wrong button.
open drawer
play a cd
10
11
getting started
getting started
open/close
play
1. Throughout this instruction manual (except in titles),
bold
print indicates the lettering
that you will find on the panels and display of your CD20R
2. The output sockets are duplicated for your convenience.
OUTPUT 1
and
2
are
electrically identical
3. If your amplifier does not have an input labelled CD, you can usually connect to
an input labelled AUX or LINE instead
4 . The power button is a latching switch. One press will hold it in, the next will release it
5. If there is already a CD in the CD20R then, after a few seconds, the display will show
the number of tracks and the total playing time of the CD instead of the word
DISC
6. You can use the button on the front panel or on the remote control
7. Install the transit mat with the tape facing upwards and in line with the direction
of movement of the drawer
GRA00046.1-[CA]CD20R 13/03/01 09:37 Page 11
