TAG Heuer Timing
Page 13
3.2. Time Check (mode B)
Time Check mode allows the user to select a count-down (with audible beeps) to the
next start occurring on either the next full minute or half minute. A count-down clock is
visible during the count-down phase which will then change to a count-up clock during
the stage. The internal memory stores the actual start time and stage time for every
stage.
1. Sequence Number of competitor / Memory status
2. Battery / Mode Setting / Running status
3. Timing Mode
4. Time of Day
5. Count Down (hh:mm:ss)
6. Running time (hh:mm:ss)
Prior to starting
Button
Split/Lap
:
Change setting for the next start (Count-Down)
60: for the next full minute
30: for the next full 30 seconds
60:30 : for next 30 sec (full minutes / full 30 sec)
Stage count-down setting :
Change the digit value
Button
Memory
:
Change the configuration of stage count-down before a start
Button
Mode
:
Validate the stage Count Down time selected
During timing –
Button
Start/Stop
: Start / stop the count-down for the next start
Finish: memorize the finish arrival time
Button
Split/Lap
:
Press and hold for 5 sec : change to new stage
Button
Memory
:
View the previous stages
Important – Fly Back Function
Whilst the time is running, pressing the Start/Stop button will pause the
running time to show a split times in seconds.
A second press Start/Stop button will revert back to running time “fly
back”, meaning the running time continues without interruption allowing
you to see a split time (not memorized).
1
2
3
4
5
6
