9
07/11/2016
A Ground Breaking Company Since 1923
Controller Configuration
“More”
takes the operator to
“Controller Configuration”.
“Drill”
button takes the operator to the “Drill Settings” screen. This screen is only active in
the “Stopped” mode and should only be altered when the operator is changing from one
machine to another and in contact with either their
Taege Dealer or Taege Engineering Ltd
technical person.
Some controllers require a
"password"
to access this screen.
“Inputs”
shows where the controller is configur
ed to accept “High impedance”, “PNP” and
“NPN” type sensors.