TAD TAD-CR1, Руководство пользователя

Страница: 14 / 19

14
Horizontal Bi-Amping
With this configuration, you may use different stereo amplifiers for the low- and high-frequency sections of the speaker system (e.g., tube
amplifiers for high frequency and solid state for low frequency). Each channel of one amplifier drives the low-frequency section of each
speaker and each channel of the other amplifier drives the high-frequency section, as shown in Figure 10.
This method requires that both amplifiers have the same gain; otherwise an imbalance will be heard between the low- and high-frequency
reproduction from the speaker system. If in doubt, please consult your TAD dealer.
HF
LF
SPEAKERS OUTPUT
INPUT
SPEAKERS OUTPUT
INPUT
OUTPUT OUTPUT
Terminal Panel
TAD Compact Reference
Pre-Amplifier
(rear)
“Y” Adaptor
(Not supplied)
(one channel shown)
(one channel shown) (one channel shown)
Amplifier
(rear)
(Use for high frequencies)
Amplifier
(rear)
(Use for low frequencies)
Figure 10. Connecting a TAD Compact Reference speaker in a horizontal bi-amplified system
TAD-CR1_ENG.indd 14 2009/09/14 10:02:23