TAD TAD-CR1 Скачать руководство пользователя страница 2

2

BEFORE YOU START

Thank you for buying this TAD product. Please read through 
these operating instructions so you will know how to operate your 
model properly. After you have finished reading the instructions, 
put them away in a safe place for future reference.

This speaker system has an impedance of 4 

 

'

Ω

, and should be 

connected only to an amplifier designed with a load impedance 
of 4 

Ω

 (the amplifier’s speaker output connector should clearly 

be labeled “4 

Ω

”).

In order to prevent damage to the speaker system resulting from 
input overload, please observe the following precautions:

Do not supply power to the speaker system in excess of the 

 

'

maximum permissible input.
Always turn off the amplifier power whenever connecting this 

 

'

unit or other components to the amplifier.
When using a graphic equalizer to emphasize loud sounds 

 

'

in the high-frequency range, do not use excessive amplifier 
volume.
Do not try to force a low-powered amplifier to produce loud 

 

'

volumes of sound (the amplifier’s harmonic distortion will be 
increased, and you may damage the speaker).

For U.S. model

WARNING:

 Handling the cord on this product or 

cords associated with accessories sold with the 

product will expose you to chemicals listed on 

proposition 65 known to the State of California and 

other governmental entities to cause cancer and 

birth defect or other reproductive harm.

 

D36-P4_A_En

Wash hands after handling

For European model

If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used 

electronic products in accordance with legislation that requires proper treatment, recovery and recycling.

Private households in the member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to 

designated collection facilities or to a retailer (if you purchase a similar new one).

For countries not mentioned above, please contact your local authorities for the correct method of disposal.

By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential 

negative effects on the environment and human health.

K058_A_En

Caution: installation

Do not place the speaker on an unstable surface. It could 

 

'

present a hazard if it falls, as well as damaging the equipment.
Do not attach these speakers to the wall or ceiling. They may 

 

'

fall off and cause injury.
Switch off and unplug your AV equipment and consult the 

 

'

instructions when connecting up components. Make sure you 
use the correct connecting cables.
Technical Audio Devices, Inc. is not responsible for any 

 

'

accidents or damage that result from improper installation, 
misuse or modification of the product, or natural disasters.

Caution: in use

Do not use the speaker to output distorted sound for long 

 

'

periods of times. This can result in a fire hazard.
Do not sit or stand on the speaker, or let children play on the 

 

'

speaker.
Do not put large or heavy objects on top of the speaker.

 

'

Do not place magnetic objects such as screwdrivers or iron 

 

'

parts near the tweeter or midrange. Since the speakers use 
strong magnets, the objects may be attracted, causing injury 
or damaging the diaphragm.

TAD-CR1_ENG.indd   2

2009/09/14   10:02:12

Содержание TAD-CR1




















Отзывы: