9
Installing The Spikes
The use of spikes on the bottom of the speaker system allows the
creation of a secure contact between the speaker cabinet and the
installation surface. The base of the speaker cabinet is provided
with three points for the installation of the spikes. By supporting
the speaker at these three points, secure contact can be
established between the speaker and installation surface without
the need for adjusting the height of the spikes.
See
Choosing Where To Place The Speakers
on page 10 for help
deciding where to place the speaker, and Figure 4 for how to
install the spikes.
There are screw holes on the aluminum plates located on the
bottom of the cabinets.
Cone-shaped spike
Spike base
Figure 4: Installing spikes on the base of the TAD Compact
Reference speaker system
CAUTION
Be sure to place the spike bases as shown, with the depression
'
facing upward toward the spike.
Removing The Grille Cover
The bass driver come equipped with a grille cover that should be
removed when the speaker are in use (see Figure 5). To remove it,
grasp the grille along the edges, pull it out, and store it in a safe
place in case of future use when moving or storing this unit.
Figure 5. Removing the grille from the TAD Compact
Reference speaker system
TAD-CR1_ENG.indd 9
2009/09/14 10:02:17
Содержание TAD-CR1
Страница 1: ......
