Taco Marine GRAND SLAM 1000, Инструкция по установке и эксплуатации

Страница: 3 / 14

GRAND SLAM 1000 / 3
GS-1000
Head units require an 8” x 6” flat surface for mounting. There must be at
least a 2" deep hollow area below the mount with access to allow tubing
and harnesses to be routed to the hydraulic manifold and control box. The
hardtop must have adequate internal bracing to support the mount under
load. Installers must also have access to the underside of the mount. This
can be through a pie plate access cover. The other option is a threaded
backing plate made into the hardtop. The control box and manifold must
be mounted in a dry area within 2 feet of each other.
Installation Requirements
Thank you
for purchasing the TACO Marine Grand Slam 1000 Electro-
Hydraulic Outrigger Mount! As a family-owned and operated business
since 1959, we take pride in offering the highest-quality, innovative
products with excellent customer service. We stand behind our
products 100 percent. If you have any questions about this mount or
installation, please contact us by visiting
tacomarine.com/contactus
.