G.
Troubleshooting
I
f the following “actions” cannot troubleshoot your failure, please
stop using the
KP120 and contact the seller who you purchased the product from.
Case
Cause
Solution
The KP120 does not respond
after pressing the Power
Switch
The circuits are cut off by
self-protection because of
their low voltage or overheat.
Recharge the unit at least
three lights are lit, or let it
cool down for 10 minutes
until the temperature is
below 55
℃
before you can
use it again.
H.
Toxic and hazardous substances illustration
Toxic and hazardous substances or elements
Pb
Hg
Cd
Cr(Ⅵ)
PBB
PBDE
O
O
O
O
O
O
O: The content of this hazardous substance in all homogeneous materials of the component
is below the limit requirements specified in the 2002/95/EC (Rohs) standard.
I.
Precautions
1.
Please be cautious when using it.
2.
Please read the instructions carefully before use.
3.
The product can only be used for starting 12V vehicles. It is prohibited to use
it on
equipment such as aircraft and ships.
4.
Please do not use it if the clamp or the unit has any damage.
5.
Prohibit using it as a car battery.
