Tack life PMS03, Руководство пользователя, Страница: 18 / 20

- EN -
9) Tighten the screw with the hexagonal wrench (19) (turn it anti-clockwise).
Move the moving bottom safety hood (12) and the saw blade screw cover (14) into the correct
position and tighten the securing screws.
Check whether the safety hood functions correctly and covers the saw blade when the sawing
arm is lowered.
Connect the saw to the power supply and start the saw blade to check whether it functions
correctly.
2. MAINTENANCE
- Keep the ventilation openings on the machine clean and free of blockages at all times.
- Check regularly whether dust or foreign particles have got into the ventilation grille next to
the motor and in the area around the release switch. Remove the accumulated dust with a
soft brush. Wear safety goggles when cleaning these areas.
- Grease all moving parts at regular intervals.
- Clean the machine’s housing, if necessary, using a soft damp cloth. A mild detergent may be
used but never use alcohol, petrol or other aggressive cleaning product.
- Never use discharging agent to clean plastic parts.
CAUTION. Ensure that no water gets into the machine.
3. GENERAL INSPECTION
Check at regular intervals that all the securing screws a firmly tightened. Pay special attention
to the external flange. The screws may come loose over time due to vibration.
Check the machine’s mains cable and all the extension cables you use for signs of damage at
regular intervals. Have the mains cable replaced by an authorised outlet.
Replace damaged extension cables.
4. LUBRICATION
After extended use the oil in the machine’s gearbox must be changed. Contact an authorised
outlet for this purpose.
- 16 -