manualshive.com logo in svg

TAC VISTA Xenta OP, Руководство пользователя

Поделиться
Скачать
TAC VISTA Xenta OP Скачать руководство пользователя страница 9

TAC Xenta, TAC Xenta OP

1  About this Manual 

TAC AB, July 2007

9 (46)

04-00065-01-en 

1

About this Manual

This manual describes a particular process. For information on certain 
products, we refer you to the manual or the Help for the product in ques-
tion.

For information on how to install software, we refer you to the instruc-
tions delivered with the software.

For information on third party products, we refer you to the instructions 
delivered with the third party product.

If you discover errors and/or unclear descriptions in this manual, please 
contact your TAC representative.

1.1

Structure

The manual is divided into the following parts:

•

Introduction

 

The Introduction section contains information on how this manual 
is structured and how it should be used to find information in the 
most efficient way.

•

Reference

 

The Reference section contains more comprehensive information 
about various parts of the Getting Started section. It also provides 
you with information on alternative solutions not covered by the 
Getting Started section.

1.2

Typographic Conventions

Throughout the manual the following specially marked texts may occur.

Note

•

We are continuously improving and correcting our documenta-
tion. This manual may have been updated.

Please check our Docnet site at www.tac.com for the latest ver-
sion.

Содержание VISTA Xenta OP















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды