TAC VISTA Xenta OP, Руководство пользователя

Страница: 22 / 46

3 Connection and Basic Functions TAC Xenta, TAC Xenta OP
22 (46) TAC AB, July 2007
04-00065-01-en
When the OP is set to allow the Xenta 100 mode, the operator is given
a choice to access TAC Xenta 100 (in stead of TAC Xenta 280/300/400)
by pressing “Enter”, each time an OP is connected.
The OP Service menu cannot be reached when the OP is in the Xenta
100 mode.
If you want to turn OFF the Xenta 100 mode, once you are in this mode,
you must temporarily disconnect the OP and let the OP revert to the
Base unit communication mode in order to be able to reach the Service
menu and from there select the 10. Change OP mode menu.
The TAC Xenta 100 OP communication is described in the next chap-
ter.
“Bindable” is explained after the Summary below.
3.6.1 Summary
To turn ON the Xenta 100 mode
Connecting to
Xenta Base unit
1. Connect the OP and wait for message
on display.
OP Service menu
1. Exit service
mode
2. Keyboard test
3. Display test
2. Press both keys and for
about three seconds simultaneously.
10 OP mode
3. Select 10. OP mode menu.
Change OP mode
Xenta 100 : ON
Bindable : TAC
4. Press or to set the Xenta
100 mode ON and press .
Press enter to
access Xenta 100
5. Temporarily disconnect the OP and
wait for message on display.
Connecting to
Xenta 100 ...
6. Press to access Xenta 100.
7. Wait for message on display.
+ –