TAC VISTA Xenta OP, Руководство пользователя

Страница: 35 / 46

TAC Xenta, TAC Xenta OP 5 Dialogs with TAC Xenta 280/300/401
TAC AB, July 2007 35 (46)
04-00065-01-en
5.4 Change the Time Channels
The operating hours for a selected object can be adjusted by altering one
or more time channels. This can be done from the operator panel. The
number of week schedules available for a specific time schedule is
defined in the application program.
The following is an example of an object (AH02) controlled by three
different schedules. The object is active 08:00–12:00 and 13:00–17:00
on weekdays and 08:00–12:00 on Saturdays. The example shows how
to change operating hours on Saturdays to be 08:00–13:30.
Example:
Week schedule
Go to the week schedule for AH02.
AH02: Time schedule
1234567
08:00–12:00 MTWTF
13:00–17:00 MTWTF
To get to the next schedule controlling AH02 press once.
AH02: Time schedule
1234567
08:00–12:00
S
As the cursor is positioned under “08”, must be pressed twice to
move the cursor to “12”. Use and to change the off hour to
“13”. Press once and adjust the minutes.
Notes
• Starting with TAC Xenta System program v 3.4 this blocking
function has been changed. The alarm information will be sent to
TAC Vista, as any normal alarm, but it will not be displayed on
the OP.
• TAC Vista stores the alarm event in the historical log, even if
alarms of priority 0 are not displayed in the alarm list.
+
–