Date: 18.12.15
Manual to personal carriage decoder
WD-PW115, WD-PW 170, WD-PW-230, WD-
PW260, WD-PW290
Document: SW 3.0 / 01www.tec4trains.deSeite
35 from 42
Revolutionen im kleinen Maßstab
Caution notes
Some vehicles have non-insulated metal frames and are electrically connected to the rails. However,
the vehicle coupling TC-H0 must under no circumstances touch the metal vehicle frame! Otherwise
the decoder will get damaged! Ensure that the TC-H0 coupling does not touch any energised part of
the track!
The WD-PWxxx decoder has several electronic outputs. It is important that, besides the intended
use of the connectors, unused cables DO NOT touch the electronically conducting vehicle parts.
Otherwise the decoder will get damaged!
TCCS defines the T4T train bus system which describes the communication between T4T-decoders.
Although all T4Tdecoder of the WD-PWxxx series are fully compatible with the DCC-standard,
TCCS cannot be combined with decoders from other manufacturers within one train set. Due to
technical reasons, the TC-H0 coupling cannot be controlled by 3rd party decoders!
Components, such as decoders, couplings and other parts, that have been damaged due to the use of
3rd party decoders, cannot be repaired under warranty!
The use of 3rd party decoders is regarded as improper use.
