T-Storm TS 120CC Slick, Инструкция по эксплуатации

Страница: 24 / 40

Undercarriage
Tail wheel assembly & installation
Locate the tail wheel assembly in the accessories box.
Using a 1.5mm Allen driver, remove all the grub screws from the collets and tiller hub. Apply blue
threadlok to them and replace. Remove the collets either side of the wheel and apply some grease
to the axle. Replace the collets.
There are three bolts pre-installed in the underside of the fuselage, remove them. Locate the three
washers from the tail wheel package and put them on the bolts, add a drop of blue threadlok to the
bolts. Line the tail wheel assembly up over the holes in the fuselage and bolt the tail wheel assembly
to the fuselage.
22