T-Storm TS 120CC Slick, Инструкция по эксплуатации

Страница: 15 / 40

Make up the servo pushrods using the turnbuckles and ball links as shown. Use the spanner found in
the spares bag in the accessories box to help.
Note: - There are two types of ball links in the hardware bag, one with a base on the brass ball and one
without. Be sure to install one of each type onto the turnbuckle. The end with the base is for the servo
arm end, the other end goes between the horns.
Tip: - Apply a little oil to the ball link to ease the insertion of the thread of the turnbuckle.
SERVO
END
HORN
END
Centre your servo and ins ta ll a 1.75” servo arm using the hardware supplied with your servo. Using
the bolts, washers and nuts supplied, attach the pushrod to the horn and servo arm as shown below.
Tip: - Although the nut has a nyloc insert, apply some blue threadlok to the nut end of the bolt for
added security.
Repeat for the other servo.
Repeat these steps for the other wing.
13