T-Storm TS 120CC Edge, Инструкция по эксплуатации

Страница: 3 / 40

Introduction
Congratulations on your purchase of the new TS 120cc Edge/Slick/Extra.
Hailing from the pioneering factory of leading aerobatic models, the TS 120cc Edge/Slick/Extra has been
specifically designed and developed to cover all aspects of aerobatic flight.
With extensive design work the TS 120cc Edge/Slick/Extra. has been developed to be a strong yet light
weight aircraft that is precise for your IMAC schedules, superior in stalled/ high alpha flight and
capable of performing the very latest extreme 3D aerobatic manoeuvres.
We are sure that the TS 120cc Edge/Slick/Extra, which has been jointly designed by T Storm Hobby,
will provide you with many hours of exhilarating flights.
Please be sure to read this manual thoroughly before assembly to familiarise yourself with the parts
and fittings. We suggest that a complete dry fit of the model is performed prior to assembly to
check for correct fit.
TS 120cc Edge/Slick/Extra kit includes good quality servo hardware, cable ties, velcro straps, pre-installed
extension leads for the elevators, pre-installed rudder pull/pull cables, spare extension leads for a
rudder push/pull setup, 5”carbon spinner, carbon under carriage, carbon wing and stabiliser tubes.
Padded wing and stabiliser bags complete the quality accessories.
The included canister holders that suit a range of different brands allow you to install the best
combination of silencers to suit the engine of your choice.
Two sets of stabilisers are included, a ‘3D’ set with counter balances and an ‘IMAC’ set without
counter balances. This allows you to choose an elevator arrangement to suit your flying style.
Whilst every care has been taken to ensure that the model reaches you in perfect condition,
sometimes mishaps can happen during transit. If you find anything wrong with the model upon
receipt, please contact the distributor immediately.
DISCLAIMER: -
THIS MODEL IS NOT A TOY.
If it is misused it can cause serious bodily harm or even death and damage to property. This model is
designed for high performance, and as such T Storm Hobbies provide high quality components with
the kit. If you have any doubts about the assembly of this model, please seek advice from an
experienced modeller.
The packaging contains small items; please keep small children away when assembling the model.
Please use the recommended equipment when assembling this model.
For safety reasons please comply with your club rules or rules as set out by your governing body.
Please read and understand this manual prior to, and refer to it often during assembly, do not
deviate from the established construction method.
T Storm Hobbies cannot accept any responsibility or liability resulting in any damaged caused from
the use of this model.
2