SW48-M
6
FEATURES
SW48-M SWEEP-N-CLEAN
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
1…Hopper
9…Electric Clutch
17…Transport Lever
2…Rear Wheel (x2)
10…Brush Frame
18… Belt Tension Spring
3…Hopper Linkage (x2)
11… Height Adjust. Screw (x2)
19… Rubber Apron
4…Hinge Point, Hopper
12…V-belt
20… Bogey Wheel (x2)
5…Actuator
13…Brush Adjustment Arm
21… Front Wheel
6…Main Frame
14…Belt Tension Arm
22…Drawbar
7…Hinge Point, Actuator Lever
15…Fuel Tank
23…Drawbar, Clevis
8… Actuator Lever, Hopper
16… Engine, Brush Drive
The SWEEP-N-CLEAN is provided with a gasoline engine (16) for driving the brush frame (10)
via the V-Belt (12).
By adjusting the tow speed, the brush speed, and the brush height, sweeping results can be
maximized.
The SWEEP-N-CLEAN has been developed to be pulled by a tow vehicle, connected at the
drawbar. (22)
The brush frame (10) can be switched on/off, and the hopper (1) can be opened/closed via a
switchbox that is placed near the driver's seat on the tow vehicle.
The rotation of the brush frame (10) is opposite the direction of travel of the machine, so the
swept debris are picked up and deposited into the hopper (1).
The topside of the hopper is perforated to allow the air stream to escape that is created by the
brush.
Figure 1
