SW48-M
21
TROUBLESHOOTING
SW48-M SWEEP-N-CLEAN
PROBLEM
POSSIBLE CAUSE
SOLUTION
Brush is Not Running
Electrical Supply Cable
Unplugged
Make connection.
Brush Engine is Not
Running
Start Engine.
Check Fuel Tank.
See Engine Manual.
Contact Your Dealer.
V-Belt Broken or Tension
Too Low
Adjust Tension or Replace
Belt.
Clutch Won't Engage
Check Electrical
Connection to Tow Vehicle.
Check Switch and Wiring.
Contact Your Dealer.
Machine is Not Sweeping
All Debris Properly
Machine in Transport
Position
Lower front of machine.
Brush is Loaded with
Debris
Clean Brush.
Brush Height Adjustment
Not Optimal
Adjust brush to contact
between 2 to 3 inches of
surface.
Brushes Damaged or Worn
Replace Brushes.
Driving Speed Too High
Reduce Speed
Brush Rotation Speed Not
Optimal
Adjust throttle on Brush
Engine.
Hopper Does Not Open or
Close
Electric Supply Cable
Unplugged
Make Connection.
Actuator Not Working
Check switch and wiring.
Make sure actuator is
plugged in.
Contact your dealer.
Actuator Working
Defectively
Contact your dealer.
Hopper Linkage is Binding
Check to make sure all bolts
are tight.
Make sure there are no
obstructions.
Contact your dealer.
All Other Troubles
Various
Contact your dealer.
