SW48-M
19
g = grease
o = oil
d = daily
w = weekly m = monthly
g/o
d/w/m
7 Check actuator for proper operation. Inspect particularly
for unusual noise or for binding.
-
w
8 Check electric clutch for proper engagement.
-
w
9 Inspect all wiring for pinching, wear or cuts.
-
w
10 Inspect entire machine for wear spots in the paint. Re-
paint worn spots or coat with grease or oil to prevent rust.
-
m
11 Maintain and lubricate the Brush Engine according to the
engine operator's manual maintenance schedule.
as recommended
Be sure to clean off all excess grease and oil from the machine after performing the scheduled
maintenance. All hazardous waste should be disposed of properly.
CLEANING
The Sweep-N-Clean should be cleaned regularly to ensure optimal sweeping results, and to help
identify early signs of wear or damage.
If you clean the Sweep-N-Clean with a high pressure washer, be sure to use the minimum
amount of pressure necessary to remove all the dirt. Be sure to avoid bearings and electrical
components with the high pressure washer whenever possible to prevent damage.
REPAIRS
Sweep-N-Clean repairs must be performed by an authorized dealer's service technician.
It is recommended that your Sweep-N-Clean undergo a regular check-up with your dealer
annually.
