T E E F O R M I N G M A C H I N E
T-60
10. Select low speed
I
by turning the
selector knob. (Always use low speed (
I
)
when forming the outlet, consult
capacity chart in section 11.1 for
options.)
Engage the feed mechanism
as shown. If it does not engage
smoothly, rotate the motor by “bumping”
the trigger.
11. Start
forming the outlet
by pulling
the trigger and continue until the T-
DRILL head is completely out of the
tube. During the forming of the tee, keep
the tube support against the tube and
push the tool toward the tube. This
insures that you obtain a circular outlet.
12. Once the T-DRILL head has come
completely out
of the outlet, release
the trigger.
IMPORTANT!
Release the drill trigger as soon as the T-DRILL head
clears the rim of the outlet.
NOTE!
Never attempt to “help” the tool by pulling it out of the tube. This
would result in an oval outlet!
NOTE!
Wipe away any exess lubricant which may have remained inside
the outlet before brazing.
Use sandcloth or Scotchbrite to clean the
inside of the rim of the outlet!
25
Содержание T-60
