T-Drill T-60, Инструкция по эксплуатации и список запасных частей

Страница: 21 / 46

T E E F O R M I N G M A C H I N E
T-60
6.3 Chucking the T-DRILL head
6.3.1 Chucking
To insert the T-DRILL head into the chuck, rotate the locking ring (1)
clockwise and slide the T-DRILL head shaft into the chuck(2). Release the
locking ring. Rotate the T-DRILL head (3) in the chuck until it locks. Make
sure the T-DRILL head is tightly chucked.
6.3.2 Removal
To remove the T-DRILL head (2) from the chuck (1), rotate the locking ring
as far it will go. Turn the T-DRILL head to the same direction one quarter
of a turn (1/4) at the same time pulling it straight out. Release the lock ring.
2
3
1
Chucking the T-DRILL head and removing it.
21