T+A MP 8, Руководство пользователя

Страница: 48 / 64

48
Approval and
conformity
with EC
directives In its original condition the unit meets all currently valid European
regulations. It is approved for use as stipulated within the EC.
By attaching the CE symbol to the unit

declares its conformity the
EC directives (See page 4) and the national laws based on those
directives.
The original, unaltered factory serial number must be present on the
outside of the unit and must be clearly legible! The serial number is a
constituent part of our conformity declaration and therefore of the
approval for operation of the device. The serial numbers on the unit
and in the original

documentation supplied with it (in particular the
inspection and guarantee certificates), must not be removed or
modified, and must correspond.
Infringing any of these conditions invalidates

conformity and
approval, and the unit may not be operated within the EC. Improper
use of the equipment makes the user liable to penalty under current
EC and national laws.
Any modifications or repairs to the unit, or any other intervention by a
workshop or other third party not authorised by

, invalidates the
approval and operational permit for the equipment.
Only genuine

accessories may be connected to the unit, or such
auxiliary devices which are themselves approved and fulfil all currently
valid legal requirements.
When used in conjunction with auxiliary devices or as part of a system
this unit may only be used for the purposes stated in the section
' Approved usage ' .
Disposing of
this product

The only permissible method of disposing of this product is to take it to
your local collection centre for electrical waste.
The
FM8 contains a Li-Ion battery. Like any other electrical device, the
FM8 must not be discarded in the normal domestic waste. It must be
taken to your local collection point for electrical scrap.
FCC
Information to
the user
(for use in the
United States
of
America
only)
Class B digital device
– instructions:
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different form that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.