T+A MP 8 Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 64

background image

44

Installation and wiring

Carefully  unpack  the  unit  and  store  the  original  packing  material
carefully.  The  carton  and  packing  are  specially  designed  for  this  unit
and  will  be  needed  again  if  you  wish  to  move  the  equipment  at  any
time.
If you have to transport the device, it must always be carried or sent in
its original packaging in order to prevent damage and defects.
If the unit gets very cold (e. g. when being transported), condensation
may form inside it. Please do not switch it on until it has had plenty of
time  to  warm  up  to  room  temperature,  so  that  any  condensation
evaporates completely.
If  the  device  has  been  in  storage,  or  has  not  been  used  for  a
protracted period (> two years), it is essential to have it checked by a
specialist technician before re-use.
Before  placing  the  unit  on  sensitive  laquer  or  wood  surfaces  please
check  the  compatibility  of  the  surface  and  the  unit's  feet  on  a  non
visible  point  and  if  necessary  use  an  underlay.  We  recommend  a
surface of stone, glass, metal or the like.
The  unit  should  be  placed  on  a  rigid,  level  base  (See  also  chapter

“Safety notes”

). When placing the unit on resonance absorbers or

anti-resonant components make sure that the stability of the unit is not
reduced.
The  unit  should  be  set  up  in  a  well  ventilated  dry  site,  out  of  direct
sunlight and away from radiators.
The  unit  must  not  be  located  close  to  heat-producing  objects  or
devices, or anything which is heat-sensitive or highly flammable.
Mains and loudspeaker cables, and also remote control leads must be
kept  as  far  away  as  possible  from  signal  leads  and  antenna  cables.
Never run them over or under the unit.



Notes on connections:

A complete connection diagram is shown in

'Appendix A'

.



Be sure to push all plugs firmly into their sockets. Loose

connections can cause hum and other unwanted noises.



The device is intended to be connected to mains outlet with

protective earth connector. Please connect it only with the mains
cable supplied to a properly installed mains outlet with protective
earth connector.



To achieve maximum possible interference rejection the mains
plug should be connected to the mains socket in such a way that
phase is connected to the mains socket contact marked with a dot
(



). The phase of the mains socket can be determined using a

special meter. If you are not sure about this, please ask your
specialist dealer.

If you encounter problems when setting up and using the amplifier for the
first time please remember that the cause is often simple, and equally
simple to eliminate. Please refer to the section of these instructions
entitled

'Trouble shooting'

.

«
...
42
43
44
45
46
...
»

Содержание MP 8

































































Отзывы:

Нет отзывов

Похожие инструкции для MP 8

Бренд: Caledonian Audio Страницы: 55

NAC 112 - ISSUE 2

Бренд: NAIM Страницы: 30

Бренд: Randall Страницы: 2

Бренд: Eclipse TD Страницы: 10

Бренд: W Audio Страницы: 11

Бренд: Unison Research Страницы: 21

Бренд: e-motion Страницы: 9

Бренд: JL Audio Страницы: 10

Бренд: Harman Kardon Страницы: 12

Stereo 60 MK III M

Бренд: icon Audio Страницы: 9

Бренд: Focal Страницы: 63

Бренд: Mofi Страницы: 9

Бренд: Universal Remote Control Страницы: 50

Бренд: Omnitronic Страницы: 20

Бренд: Farenheit Страницы: 25

Бренд: Kustom Страницы: 4

Бренд: S.M.S.L Страницы: 10

Бренд: DTronics Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды