T+A DD 1230 R, Руководство по эксплуатации

Страница: 5 / 52

5
y
y y
y
This button is designed for possible later function expan-
sions.
•
Opening the ' Main Menu '.
Pressing this button briefly opens the ' Main Menu ' .
This is where you can change the decoder settings
which are only occasionally required in normal daily
listening: perhaps to allow for temporary changes in the
listening room, or to compensate for unique character-
istics of a special listening source.
•
Opening the ' Device Setup '.
Holding the button pressed in for about one
second opens the ' Device Setup ' . This menu contains
the settings and decoder functions which are rarely
needed, such as level and tone adjustments. Dedi-
cated buttons for functions of this sort are not present,
as it is important that the front panel should be unclut-
tered.
T
T T
T
/
U
U U
U
Change buttons in the menu control system.
(see section entitled
'
Menu Control system
'
)
/
!
! !
!
Select buttons
in the menu control system.
(see section entitled ' Menu Control system ' )
x x x x
Cycles through the AV inputs TV, DVD, SET-TOP BOX,
AUX-AV as follows:
short press: next AV input
long press: previous AV input
2
2 2
2
Cycles through the connected AV source devices *) as
follows:
short press:
next
source device
long press: previous source device
*)
Note:
This assumes that you have already entered the AV
source devices in the
' Source Setup ' .
–
=
= =
=
+
The decoder features a digital volume control: every time
you press one of the volume buttons the volume in-
creases
or decreases
; ; ; ;
by 1.5 dB.
If you hold one of the volume buttons pressed in for
longer than a second, the volume continues to rise or fall
until you release the button again.
The screen displays
'
VOLUME
VOLUME VOLUME
VOLUME
'
briefly.
Note:
The volume and tone controls of the decoder are com-
pletely independent of the corresponding controls on
your
stereo pre-amplifier. This allows you to select
the optimum volume setting for each mode.