20
Source Setup
AV source devices
The purpose of the
'
Source Setup
'
is to integrate the AV
source devices connected to the decoder into a
'R'
system. For this purpose the sources are sub-divided
into three groups:
1.
High-quality pure
stereo sources
(sound only),
2. A/V sources
(picture and sound),
3. Combination sources
; i.e. machines which supply
both a picture and
high-quality
stereo sound.
To ensure that sound and picture quality are always
optimum, these device groups are integrated into the
system in different ways (see also the section enti-
tled
'
The
Surround System
'
). Please note the
following points:
Stereo sources
(e.g. tuners) should be connected di-
rectly to a pre-amplifier input. They are selected by the
corresponding source button on the front panel, or on the
remote control handset.
A/V sources
(e.g. standard video recorders) should be
connected directly to one of the decoder’s AV inputs
(SCART or Cinch). They can then be selected by the
2
2
2
2
button on the front panel, or by the
but-
ton on the remote control handset.
If you have assigned the source device to a direct select
button in the
'
Source Setup
'
, then you can select it di-
rectly by pressing the appropriate source button.
Combination source devices
(e.g. DVD players and
set-top boxes) provide both an analogue stereo signal
and a digital surround signal.
The
surround design philosophy enables you to
connect the analogue stereo output of a combination
source device to a pre-amplifier input.
For example, if your DVD player is playing a DVD in
surround mode
, the picture signal is passed to the
decoder via a SCART lead, and the sound signal via a
digital connection.
In surround mode you select the DVD player by pressing
the
2
2
2
2
button on the front panel, or the
button on the remote control handset.
If you have assigned the DVD player to a direct select
button in the
'
Source Setup
'
, then you can select it di-
rectly by pressing the appropriate source button.
CDs can be played on the DVD player in high-quality
stereo mode
via the direct connection to the amplifier; in
this situation the decoder is removed from the signal
path.
In stereo mode you select the DVD player by pressing
the corresponding source button on the pre-amplifier’s
front panel, or on the remote control handset.
Содержание DD 1230 R
Страница 1: ...V 2 7 Bestell Nummer 9103 0282 OPERATING INSTRUCTIONS DD 1230 R DD 1530 R ...
Страница 33: ...33 Connecting the digital surround decoder to a TV set and the surround loudspeakers DD 1530 R ...
Страница 35: ...35 Connecting the DD 1530 R to a integrated amplifier with TASI and RLINK sockets ...
Страница 52: ... elektroakustik GmbH Co KG Herford Germany ...
