T+A DD 1230 R, Руководство по эксплуатации

Страница: 42 / 52

42
Variations on standard wiring
Special compatibility sets are available, to enable you to
combine the decoder with amplifiers and receivers from
earlier generations of
equipment, or with amplifiers /
receivers of other makes, and also to use the unit in a
home cinema set-up.
To establish which compatibility set you require, please
check first whether your
amplifier / receiver features
a TASI interface (Cinch version: see illustration) or an
R
LINK
socket.
TASI-interface
(Cinch version)
The following list provides information about the com-
patibility set you require.
1. amplifier (Cinch-version) and R
LINK
-socket.
For this variant you need the compatibility set DKS 1 .
2. amplifier with TASI interface (Cinch-version)
but without R
LINK
socket.
For this variant you need the compatibility set DKS 2 .
3. amplifier without TASI interface and without
R
LINK
socket.
If you have an amplifier of this type, we recommend
that you upgrade your system by purchasing a
-
amplifier with TASI- and R
LINK
interface. However, it
is possible to have certain models of amplifier
upgrade. Please ask your specialist dealer for
further details.
4. The decoder in a home cinema set-up
The decoder can also be used for pure home cinema
applications without the addition of a stereo pre-
amplifier or integrated amlifier. In this case a sepa-
rate power amplifier (e.g.
A 1210 or A 1520 is re-
quired for the front channels; see sketch.
For this variant you need the compatibility set DKS 3 .
5. Connecting the decoder to a different make of
amplifier / receiver.
If you are using a different make of amplifier , the
decoder can be looped into the TAPE MONITOR cir-
cuit; see sketch.
For this variant you need the compatibility set DKS 4 .
6. Connecting the decoder to the PD 1200 R (ana-
logue).
For this variant you need the compatibility set DKS 5 .
Note:
Each compatibility set consists of the hardware you
require for the connections, together with instruc-
tions and information on connecting and setting up
the equipment.