26
27
tube·amp·company
tube·amp·company
INCLUDED IN DELIVERY
DESCRIPTION OF THE APPLIANCE
Please check the contents of the packaging, which in addition to the
appliance should contain the following accessories:
• 1 power cable
• 2 RCA cables
• 1 magnetic puck
• 1 remote control “TRC-1”
• 2 AAA (LR3) batteries
• this manual
After many new disc formats, praised as successors
of the audio CD, due to format disputes of the manu-
facturers or lack of consumer acceptance did not
catch on so far, the following is safe to state: the
Audio CD will still play an important role for a very
long time and offers enough sound potential with
good recording technology and sophisticated repro-
duction technique in the CD player.
The T.A.C. C-60 is a CD player that can present
the full dynamic range and the full sound potenti-
al of Audio CDs. Its extraordinary CD loading
mechanism makes everyday handling of Audio
CDs an easy-going pleasure. Its exclusive design
draws the attention magnetically towards it.
Additional features of this player are an XLR out-
put, an optical digital output as well as a coaxial
digital output. The C-60 remote control is able to
also control the integrated amplifier V-60 from this
product line. Manufactured on the basis of strict
quality control an outstanding low cost-perfor-
mance ratio can be taken for granted with every
T.A.C. appliance.
Optically the unit harmonizes with the hybrid inte-
grated amplifier T.A.C. V-60. Combined they
represent a stereo system that offers quality of
sound and workmanship that nowadays are not
run of the mill.
PRIOR INITIAL OPERATION
After unpacking the CD player please remove the
foam pad from the top of the CD chamber cover.
This pad protects the CD chamber cover from
being scratched or damaged while the player is
being transported.
Please keep this pad like the rest of the packaging
and apply it again to its original place when
packing the player for a future transport.
INSERTION OF A CD
This CD player is equipped with an extraordinary CD loading mechanism and Audio CD chamber that is
different from usual CD players and requires the user to take special care when loading/removing an
Audio CD.
1. Open the CD chamber cover by holding the metal handle and sliding the cover towards the rear panel of the
CD player. If an inserted CD is still being played back, that will be stopped automatically.
2. Lift off the central magnetic puck on top of the CD (when using the player for the first time after purchase this
magnetic clamp is to be found inside the provided accessory pack).
3. If necessary, remove the inserted Audio CD. Place the disk you want to hear next with the central hole on top
of the spindle inside the CD chamber.
4. Refit the magnetic puck to a position in the middle of the compact disc.
5. Close the chamber cover by sliding it all the way towards the CD player front panel. The CD is only read in
and played back if the cover is closed completely.
C-60 24.04.2009 16:53 Uhr Seite 26
