SyxthSense Ltd
Copyright © 2018 SyxthSense Ltd. All rights reserved - 04/2018
PS
MOD3.103
- 11/23
Online store:
www.syxthsense.com
Enquiries: T:
44 (0)1392 875 414
E:
DI1 Digital Volt-Free Input
The digital volt-free contact can be used to override the interface to ECO and OFF/FROST modes, or
for just monitoring purposed. The configuration options are:-
•
Close for ECO Mode
•
Open for ECO Mode
•
Close for OFF Mode
•
Open for OFF Mode
•
Alarm
•
Network
"Close For" Configuration - The digital volt-free contact can be linked to e.g. external timer to switch
the user interface to OFF or ECO mode (input delay timer).
"Open For" Configuration - The digital volt-free input can be used to activate ECO or OFF mode when
the contact opens. In this mode it can be connected to a window switch or door card switch.
Alarm Configuration - when the contact closes the "DI Contact Alarm" alarm message is displayed on
the screen.
Network option is selected when the digital input is used for monitoring purposes only.
Humidity Measurement (-RH
option)
The models with RH option have a 2%rH accurate humidity sensor for room space humidity
measurement. The humidity reading is displayed inside the SMALL ACTION CIRCLE (display as
default enabled, option to disable through configuration pages) and available over the communication
network.
Touchscreen Calibration
The touchscreen can be re-calibrated by pressing the screen on power-up. Calibrate the screen by
swiping to the all four edges of the screen and then press OK to accept the new settings.
Programming Schedule
(SRI-P75 Only)
The SRI-P75 user interfaces have up to five programmable time switching times. Each switching time
can be configured to switch the
Time Channel
network variable On/Off. The times can be set for
individual weekdays or can be switched 5+2 mode where the targets are set for WEEKDAYS or
WEEKENDS as a group.
The SCHEDULE OVERVIEW screen shows the current ON and OFF switching periods. By selecting
the day it is possible to adjust the switching times and On/Off setting.
NOTE: Switching from the 7 DAYS mode to 5+2 DAYS mode will set all weekday/weekend to the
group settings. When returning back to 7 DAYS mode the setting are required to be re-entered for
each day. A copy function is available to copy times and target temperatures from one day (or group)
to other day.
SETTING PROGRAM SCHEDULES
7 DAYS OR 5+2 DAYS
MODE SELECTION
7 Days
7 DAYS PROGRAMMING MODE
SELECT
DAY
Copy
Mon
Tue
Wed
Thu
Fri
Sat
Sun
0
12
24
18
6
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Schedule Overview
VISUAL SCHEDULE
OVERVIEW
Time
Target
Monday
Set Values
TOUCH TIME TO
CHANGE
SWITCHING
TIME
TOUCH TARGET TO
SELECT SWITCH-
ING TARGET
7
4
1
.
0
8 9
5 6 -
2 3
Esc
Enter
Del
7
4
1
0
ENTER SELECTED PERIOD
SWITCHING TIME
:
Monday
Set Switching Time
07:40
0
12
24
18
6
Mon
On
Off
On
06:30
Off
13:00
On
18:00
Off
22:30
Off
23:30
Language Selection
The SRI-75 user pages can be displayed in different languages by selecting the language from the
System Configuration pages.
