SYSTRONIK S4600-ST, Руководство по эксплуатации

Страница: 32 / 54

Operation
32 S4600-ST®
6.13 "Leakage rate measurement" program (option)

Starting the "Leakage mesurement" program
When you start the "Leakage measurement" program, the pressure
sensor is first zero-balanced; this takes a few seconds.
The colour of the pressure value then changes from grey to black.
The black colour indicates that the device is ready for
measurements. Zero balancing can also be performed manually via
the main menu.
It is possible to enter the system (tube) volume manually. If the
system volume is unknown the device can calculate the volume
automatically.
Manually:
If the system volume is known s
elect “Enter vol. manually” and use
the editor to set the volume.