Operation
S4600-ST®
25
6.9
"Pressure Measurement" program
Starting the "Pressure Measurement" program
When you start the "Pressure Measurement" program, the pressure
sensor is first zero-balanced; this takes a few seconds.
The colour of the pressure value then changes from grey to black.
The black colour indicates that the device is ready for
measurements. Zero balancing can also be performed manually via
the main menu.
The optional Data Logger function is also available; it allows you to
save a series of measured values to the MicroSD card. The Data
Logger function is described in chapter 6.7, page 22.
Key
Function
Quitting the program "Pressure Measurement" /
displaying the Direct Access menu.
Changing selection in the menu.
Displaying the main menu.
Switch off the device.
Содержание S4600-ST
Страница 2: ...2 S4600 ST ...
Страница 53: ...Appendix S4600 ST 53 16 Appendix 16 1 DIN EN 50379 certificate ...
Страница 54: ...Appendix 54 S4600 ST ...