SYSTEMS Poweramp EH Series, Руководство пользователя

Страница: 20 / 62

18
4111-0004 — Apr. 2021
© 2021 Systems, LLC
17. Shim and weld the maintenance prop (Figure 12):
a. Install shims under maintenance prop ( D )
where prop attaches to leveler frame ( E ). Make
sure prop is solidly shimmed.
b. Raise maintenance prop ( D ) to the service
(upright) position and lock prop in this position
using an OSHA approved locking device.
A — Platform Joists
B — Shim Location (Under Platform Cylinder Trunnions)
C — Removable “Clean Sweep” Frame Section
D — Maintenance Prop
E — Shim Location (Under Maintenance Prop)
Install Dock Leveler (continued)
18. Install shims at locations ( B and E ) using an
appropriate shimming method (see Figure 13). Both
platform cylinder trunnions must be solidly shimmed
the entire length of the trunnion. Make sure the
trunnions are level from side-to-side as well as from
front-to-back.
19. Finish weld all shims using a fillet weld:
• Weld all shims within each shim stack to each
other, then weld the shim stack to the leveler
frame.
• Weld the front leveler frame shim stacks to the
front pit curb steel.
DO NOT use the maintenance prop to support the
raised platform until the maintenance prop has
been properly shimmed and welded. The shims
must be welded to each other, and also to the
leveler frame.
Make sure the platform is properly supported in the
raised position before entering the pit to finish weld
the shims.
INSTALLATION
TOLERANCES
(UNLESS OTHERWISE NOTED)
FRACTIONAL: ` ` 1/32"
DECIMAL:
.00 =
` ` .01"
.000 = ` ` .005"
ANGULAR:
` `
1
~~
DRAWN BY CHECKED BY
DRAWING NO.
DATE
KRV 3/12/2018
L o a d i n g D o c k E q u i p m e n t
P O W E R A M P
M C G U I R E
D L M
This print is the property of Systems, Inc. and represents a proprietary article in which Systems, Inc. retains any and all patent and other rights, including exclusive rights
of use and/or manufacture and/or sale. Possession of this print does not convey any permission to reproduce, print or manufacture the article or articles shown therein,
such permission to be granted only by written authorization signed by an officer or other authorized agent of Systems,Inc. thereof.
MATERIAL STOCK NO.
EH FINAL ASSEMBLY
PAGE 18
A
B
C
D
E
Figure 12