SYSTEMS Poweramp EH Series, Руководство пользователя

Страница: 28 / 62

26
4111-0004 — Apr. 2021
© 2021 Systems, LLC
Ramp Loading/Unloading
1. Before activating dock leveler, check to make sure
the transport vehicle is positioned squarely against
dock bumpers. Ensure lip will avoid contact with
transport vehicle frame, sides and cargo during dock
leveler activation. If contact is likely or observed,
reposition transport vehicle.
2. Instruct driver to remain at the dock until the
loading or unloading process has been completed.
3. Chock the transport vehicle wheels, or use a
vehicle restraint if available.
4. Extend the dock leveler onto the transport vehicle
as follows:
a. Raise the platform by pressing and holding the
RAISE button.
b. Hold the RAISE button until the lip is fully
extended, then release the RAISE button. The
platform will lower until the lip is resting on the
transport vehicle bed.
c. Make sure that the lip is fully extended and
supported on the transport vehicle along the
entire width of the platform, with at least 4 in.
(102 mm) of lip contacting the transport vehicle
bed. See Figure 16.
5. Proceed with loading or unloading the transport
vehicle.
Operating Instructions
Figure 16
6. When loading or unloading is finished, raise the
platform by pressing and holding the RAISE button
until the lip folds enough to land in the lip keepers,
then release the RAISE button. The platform will
return to the cross-traffic position. See Figure 17.
7. Remove chocks from transport vehicle wheels, or
release the vehicle restraint if used.
8. Indicate to driver that the transport vehicle may
leave the dock.
Figure 17
OPERATION