SystemBase sWiFi/all, Руководство пользователя

Страница: 24 / 36

sWiFi/all
User Manual
23
Soft-AP #2
To set Soft-AP mode
Setup sWiFi -1(Soft-AP) sWiFi/all-2(Infrastructure)
Network
Device Name: sWiFi/all_SoftAP1
Device IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
DNS:168.126.63.1
Connection Type: Soft-AP
Channel: 10
Security: open
Device Name: sWiFi/all_2
Device IP Address: 192.168.1.200
Subnet Mask: 255.255.255.0
DNS:168.126.63.1
Connection Type: Infrastructure
Channel: 10
Target AP Name: sWiFi/all_SoftAP1
Target AP MAC Address: MAC Address of
sWiFi/all_SoftAP1
Serial
Operation Mode: TCP Server
Local Port: 4001 Operation Mode: TCP Client
Target IP: 192.168.1.100
Target Port: 4001
* Setting values are examples for understanding. The values may vary by product and site.
As shown above, Soft-AP, Infrastructure, Server/Client settings enables 1:1 communication between devices.
sWiFi/all set to Soft-AP operates as Static IP, which is fixed IP.
To connect, the counterpart sWiFi/all(sWiFi/all-2 in the above figure) should also be set to the Static IP, which is
a fixed IP in the same bandwidth as sWiFi/all in Soft AP.
Soft-AP operates in open, WPA_PSK and WPA2_PSK encryption modes.
[Tip] When using as Soft-AP, we recommend you to change the default Device Name(sWiFi_all) so that you can
find it easily through AP as we have changed the device name “sWiFi -1” to "sWiFi/all_SoftAP1" above.
Soft-AP operates in open, WPA_PSK and WPA2_PSK encryption modes.