SystemBase sWiFi/all, Руководство пользователя

Страница: 30 / 36

sWiFi/all
User Manual
29
information of AP to access.
In Soft-AP mode, encryption mode can be chosen between
open, WSA-PSK.
Security Key - Enter the password of a AP to access.
Connection Type Infrastructure
Set the connection type of sWiFi/all.
Infrastructure
The mode that intermediate AP performs a sWiFi/all connection
and exchanges data. When selecting this type, the AP Scan
Button menu appears.
Soft AP
The mode that sWiFi/all performs AP functions.
Without the AP, the computer or other sWiFi/all is connected to
the operating sWiFi/all to communicate. At this time, please
select Static IP for the sWiFi/all you want to connect and use it
as the static IP in the same band.
Target AP Name(SSID) -
Designate the AP name of the target.
If you select AP with [AP Scan] button, the AP name is
automatically displayed.
Target AP MAC Address -
Designate the MAC Address of the target AP.
If you select AP with [AP Scan] button, the AP name is
automatically displayed.
Country KR
Note the country code for sWiFi/all/
*Channel values may vary by country.
Mode 802.11 a/b/g/n
Set 802.11 protocol(a/b/g/n).
802.11 a
5GHz Bandwidth
Uses OFDM technology and supports transmission speed up to
54Mbps. Easily affected by the surrounding environment such
as obstacles or urban buildings due to the signal characteristic.
802.11 b
2.4GHz Bandwidth
The highest transmission speed is 11Mbps, but during
implementation of CSMA/CA technology, it shows efficiency of
6-7Mbps.
802.11 g
2.4GHz Bandwidth
The transmission speed is as same as
802.11 a and the only
difference is that it uses 2.4GHz bandwidth frequency. It is
easily compatible with the commonly used
802.11 b and is