SystemBase Eddy-CPU, Руководство пользователя

Страница: 31 / 55

Eddy-CPU User Guide
31
Current subnet mask Eddy is assigned to.
When line type is Static IP, manually enter an appropriate subnet mask.
When line type is DHCP, current subnet mask is displayed, but it is not editable.
z
Gateway (Default: 192.168.0.1)
Current default gateway Eddy is assigned to.
When line type is Static IP, manually enter an appropriate default gateway.
When line type is DHCP, current default gateway is displayed, but it is not editable.
z
SNMP (Default: Disable)
Options: Enable / Disable
Enable or disable SNMP(Simple Network Management Protocol) support.
MIB-II (RFC 1213): System, Interface, IP, ICMP, TCP, UDP
MIB-I (RFC 1317): Serial Interface
NMS Configuration
If multiple devices are installed and managed together, integration in management is necessary. In
addition, it is often the case when the device reports an erroneous status, figuring out the reason for the
failure becomes a time-consuming job. To solve this inefficiency and provide better solution, Eddy
includes a Network Management System software, Portview.
z
NMS Server IP / Port (Default: 0.0.0.0 / 4000)
Set the IP address and the port number of the PC where Portview in installed. For more
information on Portview, please refer to the Portview User Manual.
If IP is set to 0.0.0.0, NMS feature is disabled.
z
Device Name (Default: Eddy-1/Pin)
Set the device name for management. 32 Characters at maximum.
z
Group (Default: None)
Set the group name for management. 32 Characters at maximum.
z
Location (Default: None)
Set the location name for management. 32 Characters at maximum.