SystemBase Eddy-CPU, Руководство пользователя

Страница: 47 / 55

Eddy-CPU User Guide
47
z
set port 1 signal [data / modem] (Default: data)
Set the signal line checking method for the device to be connected to the given serial port.
z
set port 1 remote <IP address> (Default: 0.0.0.0)
When the Operation Mode is set to TCP Client, set the IP address to connect to.
z
set port 1 rport <socket number> (Default: 4000)
When the Operation Mode is set to TCP Client, set the socket number to connect to.
z
set port 1 keepalive <0 ~ 32767> (Default: 0 sec)
After a certain amount of time passes without any communication after the socket connection
between the given serial port and the server is established, automatically disconnect the socket
connection. If the value is set to 0, this function is disabled.
z
set port 1 mtu <1 ~ 1100> (Default: 0)
MTU stands for Maximum Transmission Unit, and this option needs to be set when
consecutive data from the given serial port needs to be transmitted to socket at once.
z
set port 1 uselogin [0 / 1] (Default: 0-Disable)
When the Operation Mode is set to TCP Server, ask for the username and password when the
client tries to connect. Set to 1 to enable.
z
set port 1 conusername <username> (Default: conuser)
When the Operation Mode is set to TCP Server, set the username to ask for.
z
set port 1 conpassword <password> (Default: 99999999)
When the Operation Mode is set as TCP Server, set the password to ask for.