Systembase C300xr
0018-013-009
Page 22 of 28
The C300xr has 2 levels of password protection to avoid accidental re-configuration; Edit Lock
which allows the user to view all configuration menus but does not allow any changes, and
Full Lock which inhibits all access to the configuration menus.
MENU : Password
STATUS : Not Set
The
>
button is used to edit the Password Level to one of the following: Not Set, Edit Lock or
Full Lock. The display changes as follows:
MENU : Password
STATUS : Edit Lock
4.8
Set Defaults
This menu allows the user to re-configure all the patches back to Factory Defaults.
Please note that any changes made to the patch configurations will be lost, there is no
Undo option.
MENU : Set Defaults
The
>
button is used to select the Set Defaults option, the display changes as follows:
MENU : Set Defaults
Confirm Yes/No ?
Press the
YES
button to confirm, and the
NO
button to abort.
MENU : Set Defaults
4.9
Last Caller Identification
The C300xr can store the ISDN telephone number of the last incoming caller. This feature
requires Caller Line Identification (CLI) to be enabled, which is usually provided as an option
when the ISDN line is installed. If Caller Line Identification (CLI) is not enabled, then the
following will be displayed:
MENU : Caller ID
Null
If Caller Line Identification (CLI) is enabled, then the following will be displayed:
MENU : Caller ID
01256880123
4.10 Screen Saver
The screen saver appears as a * constantly moving from left to right on the top row of the VFD
display module. The screen saver will automatically start 1 hour following the last event on
