owner’s manual
11
●
For Duct/Celling Type
Push the grille switches to the arrow directions, then open the
inlet grille downwards. Turn back the air filter fixing block, then
take out the inlet grille.
●
For One-Way Cassette Type
Remove the inlet grille , hold the air-in buckle with two hands
and open the grille downwards, pull it towards inside part and
push the filter buckle to remove the grille.
Air filter
Fig.5-3
● For digital scroll floor standing type
The filter is housed in the lower part of the unit in versions II and
III which take in air from below or from the rear,To remove the
filter in versions II and III proceed as followed.
While it is housed in the front cowl in version I,which take in air
from the front.
To remove the filter in version I, proceed as followed.
Fig.5-9
Fig.5-10
■ Take off the inlet grille from the panel.
Air Outlet
Selection Switch
special function filter
●
For Console Type
Push the grille switches to the arrow directions, then open the
inlet grille downwards. Press the claws on the right and left of the
air filter down slightly, then pull upward.
Fig.5-6
Hold the tabs of the frame,and remove the claws in 4 places.
(The special function filter can be renewed by washing it with
water once every 6 months.We recommend replacing it once
every 3 years.)
Fig.5-7
Fig.5-8
■
Two-way cassette type
1) Upright row (non-directional) one side of the inlet grille, and
putdown the other side, and then slide follow the arrow’s
direction refers to Fig.5-9
2) Loosen the hanger of the putdown side refers to Fig.5-10
3) Open the inlet grille (about 45°), and remove the other side,
refers to Fig.5-11
●
For One-Way Cassette Type
(The second generation 18-36 model)
Fig.5-4
Fig.5-5
