■
Floor standing type
● Version I
Vertical unit with casing,with air intake from front and air
outlet on top, for installation on a wall or on feet on the floor.
● Version II
Vertical unit with casing,with air intake from below and air
outlet on top, for installation on a wall or on feet on the floor.
● Version III
Vertical unit for flush mounting,with air intake from below and
air delivery at the top, for installation on a wall.
Air out, air out louver
(Adjust the air-out direction)
Air Intake
(Intake room air)
Air intake
(Intake room air)
Air out, air out louver
(Adjust the air-out direction)
Feet (Lift up the
air conditioner)
Air filter
(Filter the dust in the air)
Electric control box
Air outlet
(Outlet room air)
Air intake
(Intake room air here)
Air filter
(Filter the dust in the air)
Use the system in the following temperature for safe and
effective operation. The Max operation temperature for
the air conditioner.(Cooling/Heating)
3. AIR CONDITIONER OPERATIONS AND
PERFORMANCE
Cooling operation
Heating operating
(cooling only type without)
Mode
Temperature
Indoor
temperature
If air conditioner is used outside the above conditions, it may
cause the unit to function abnormally.
The phenomenon is normal that the surface of air conditioning
may condense water when the relative humidity is very high in
the room, please close the door and window.
Optimum performance will be achieved within these operating
temperature range.
Protection device will be activated and the unit stops when the
above conditions can not be achieved.
1
2
3
4
NOTE
Table 3-1
Indoor Humidity Below 80%
80% humidity or above will cause the
machine surface condensing dew.
17°C ~ 32°C
≤27°C
Fig.2-16
Fig.2-17
owner’s manual
5
Fig.2-18
Fig.2-19
■
Two-way cassette type
Air Out Louver
(Adjustable)
Air Filter
(Filter the dust in the intake air)
Air Intake
(Intake room air)
Inlet grille
Electric control box
