11
4.4.1
Installation procedure
Danger
• Make sure that the mains to the unit is disconnected before performing any maintenance or electrical
work!
• All electrical connections must be carried out by an authorized installer and in accordance with local rules
and regulations.
Warning
• The units electrical connection to the mains must be preceded by an all pole circuit breaker with a
minimum 3 mm gap.
• The door handles are only intended to be used during the installation and service. These must be
removed before the unit is put into operation to ensure the required level of safety for the unit.
• The unit must be duct connected or in some other way provided with protection so that it is not possible
to come in contact with the fans through the duct connections.
Warning
Beware of sharp edges during mounting and maintenance. Make sure that a proper lifting device is used.
Use protective clothing.
1. Prepare the surface where the unit is to be mounted. Make sure that the surface is flat, levelled and that it
supports the weight of the unit. Perform the installation in accordance with local rules and regulations.
2. Lift the unit in place.
3. Level the unit with help of the enclosed mounting
feet.
4. Connect the unit electrically to the mains through the
all pole circuit breaker (safety switch), which is enclosed
inside the unit on delivery. The wiring is led through the
top of the unit.
See enclosed wiring diagram, and below table for more
information.
137667 | A001
Содержание Topvex SC03-11
Страница 4: ......
Страница 12: ...8 Installation Fig 5 Fig 6 137667 A001 ...