SystemAir TFC 225 P, Эксплуатация и обслуживание

Страница: 20 / 24

16 | Control panel
Select operation mode
Marked area indicates factory setting.
Mode Function
4.00
Pressure sensor output 0...10 V proportional to measuring range.
4.01 Factory preset
Pressure controller (PID): Output 0...10 V depending on adjusted setpoint and
measured actual value.
5.00 Air volume sensor: Output 0...10 V proportional to measuring range
(depending on setting for K-factor).
5.01
Air volume controller (PID): Output 0...10 V depending on adjusted setpoint
and measured actual value
Table 1 Parameter table
Parameter
Display/Factory
setting Function
Mode
4.00 4.01 5.00 5.01
Mode
INFO Information
∆
p 0 Pa 0 Pa
- -
Different actual
value for
differential
pressure
qV
- -
0 m 3 /h 0 m 3 /h Display actual
value for airflow
Setpoint 1
-
100 Pa
-
1185 m 3 /h Display active
Setpoint
Range qV
- -
2371 m
3
/h 2371 m
3
/h Air volume
measuring range
depending on
sensor
measuring range
and K-factor
Uout 0.0 V 9.9 V 0.0 V 9.9 V
Magnitude of the
output voltage
0...10 V
UNIcon 1.00 1.00 1.00 1.00
Software version
∆
p
- -
0 Pa 0 Pa Display actual
value for volume
measurement
206434 | A006