SystemAir Sysloop EVO Скачать руководство пользователя

Страница: 7 / 52

English

SYSLOOP EVO

2. INSPECTION AND STORAGE

The appliances are delivered fully assembled, factory tested and ready to operate.

Any modification to the units without the manufacturer’s prior approval, shall automatically render the

warranty null and void.
The following conditions must be respected in order to maintain the validity of the warranty:

Commissioning shall be performed by specialised technicians from technical services approved by

the manufacturer.

Maintenance shall be performed by technicians trained for this purpose.

Only Original Equipment spare parts shall be used.

All the operations listed in the present manual shall be performed within the required time limits.

THE WARRANTY SHALL BE NULL AND VOID IN THE EVENT

OF NON-COMPLIANCE WITH ANY OF THE ABOVE CONDITIONS.

3. WARRANTY

4. CONTENTS OF PACKAGE

On opening the carton, check that all the accessories required for installation are present.

At the time of receiving the equipment carefully cross check all the elements against the shipping documents

in order to ensure that all the crates and boxes have been received. Inspect all the units for any visible or

hidden damage.

In the event of shipping damage, write precise details of the damage on the shipper’s delivery note and

send immediately a registered letter to the shipper within 48 hours, clearly stating the damage caused.

Forward a copy of this letter to the manufacturer or his representative.

Never store or transport the unit upside down. It must be stored indoors, completely protected from

rain, snow etc. The unit must not be damaged by changes in the weather (high and low temperatures).

Excessively high temperatures (above 60 °C) can harm certain plastic materials and cause permanent

damage. Moreover, the performance of certain electrical or electronic components can be impaired.

Package contents:

appliance

suspension kit comprising:

4 nuts

4 locknuts

4 shock mounts

4 washers

installation manual

SEE APPENDIX

5. DIMENSIONS

6. HANDLING

6.1. NET WEIGHT

The appliance may be handled with a pallet truck or a forklift truck.

MODELS

SYSLOOP EVO

WEIGTH

WITH PLENUM

WITHOUT PLENUM

Содержание Sysloop EVO





















































Результаты поиска

Содержание Sysloop EVO

Отзывы:

Похожие инструкции для Sysloop EVO

Бренды по названию

Популярные бренды

SystemAir Sysloop EVO, Руководство по установке и обслуживанию

Результаты поиска

Содержание Sysloop EVO

Отзывы:

Похожие инструкции для Sysloop EVO

Бренды по названию

Популярные бренды