SystemAir SYSCONTROL WC 90, Инструкция по установке и эксплуатации

Страница: 7 / 24

1
2
2
1
1
2
3
1
1
1
1
2
3
4
1
4
1
5
5 1
Don’t install at the place where contents with heavy oil, vapor or sulfureted gas,
otherwise, this product would be deformed that would lead to system malfunction.
Select the installation location
Preparation before installation
1. Please confirm that all the following parts you have been supply.
2. Please filed install the following accessory.
Wire controller
No.
No.
Name
Name
Qty.
Qty.
Remark
Remark
Electric cabinet
Precaution of install the wire control
1. This manual provides the installation method of wire controller. Please refer to the
wiring diagram of this installation manual to wire the wire controller with indoor unit.
3. The Shielded wire of the wire controller must be grounded reliable.
4. Upon finish the wire controller connection, do not employed tramegger to
detect the insulation.
2. The wire controller working in low voltage loop circuit. Forbid to directly contact
the cable of 220Vcommercial electricity or of 380V high voltage, and don’t wire
this kind of wire in the said loop; wiring clearance between configured tubes
should at the range of 300~500 or above.
Universal electric cabinet’s specification.
Pre-embed it into wall.
Pre-embed RVVP-0.5mm2x5 into wall.
Pre-embed into wall, the longest length should not exceeding than 15m.
For install Cruciform slot screw.
For unscrew the bottom cover of wire controller.
Shielded 5-core cable
Wire configured tube (insulated sheath)
Phillips screwdriver
Slotted head screwdriver
Cruciform slot screw M4×25
Installation and owner’s manual
This accessory is used when install the wire
control inside the electric cabinet
For connect between the display panel wire
and shielded 5-core cable
Plastic bolt
The connective wires of display panel
(on some models)
3