SystemAir SYSCONTROL WC 90, Инструкция по установке и эксплуатации

Страница: 16 / 24

①
MODE Select Button:
②
ON/OFF Button:
③
Adjust Button
:
④
Adjust Button :
When in off state, press this button, the indicator is on, the wire controller enter into
on state, and send setting information to in door Pcb . When in on state,press this
button,the indicator is off,and send instruction.If timer on or timer off has been set,it
concel this setting then send instruction to stop the machine.
Press this key to increase the indoor temperature settings, 1 degree to be increased
for every once press.
Press this key to decrease the indoor temperature settings, 1 degree to be decreased
for every once press.
Each time you push the button, a mode is selected in a sequence that goes from
AUTO
、
COOL
、
DRY
、
HEAT and FAN as the following figure indicates:
12
HEAT function is invalid for cool only type unit.
NOTE
AUTO
→
COOL
→
DRY
→
HEAT
→
FAN